Have you ever tried to drill a hole for a new fitting but found that the drill bit was too big or the wall was too crumbly or that the hole is in plasterboard which is not deep enough to secure the plug?

Has one of your fittings fallen from the wall leaving a gaping hole that is too big to simply replace the fitting securely?

All of the above scenarios will result in the plug not being able to perform its function as the plug needs to have a very secure surrounding for it to be able to bite and expand accordingly as the screw is tightened. If not, the plug and screw will simply turn in the hole.

What Should You Do?
You know you should really drill another hole or try to fill the hole properly with filler or resin, leave it to dry, then redrill the hole, but this takes a lot of time leaving most people to resort to a quick fix of trying to secure the plug with match sticks or some other unsuitable temporary and insecure wedge.

It is a common problem that we all face, but what if you could secure the plug properly in just a few minutes without having to all the mess and delay of filler or resin? Well now, you can with WetNFix™.

WetNFix is a new multi-award winning product which will enable you to say goodbye to all these problems quickly and securely.

So What Exactly Is WetNFix?
WetNFix™ is a round gypsum impregnated pad that fits around the plug, drying quickly to bond the plug with the surrounding wall. It needs only a little water to apply and sets completely in just three minutes. It is suitable for all plug sizes and most surfaces including masonry, ceramics, plaster, plasterboard and wood. Minimising mess and delay and maximising ease-of-use for a secure solution to such a common problem.  It is designed for lightweight fittings only. If there is any concern always consult a professional building contractor.